For Nigerian deployments, this product should be evaluated as part of the complete network path, including its connectors, mapping and acceptance values. This 16-fiber OM4 breakout uses APC polish at the MMC connector and at the two MTP-8 connectors. One compact MMC female interface fans out to two MTP Elite female interfaces over bend-insensitive multimode fiber. It is developed for parallel optical channels where low-reflection APC connections and a direct two-way fan-out are needed without intermediate cassette hardware.
Product Highlights
- MMC Female to MTP® Female, 16 Fibers
- OM4 50/125μm, bend-insensitive fiber
- MMC insertion loss ≤0.35dB, return loss ≥40/45dB (MMC/MTP®)
- Harness Polarity wiring scheme
- 2.5mm Plenum (OFNP) cable
- Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)
Specifications
| Part Number | 16FMMCMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC Female (Non-Pinned) |
| Connector B | US Conec MTP® Elite Female (Non-Pinned) |
| Polish Type | APC to APC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Fiber Count | 16 Fibers |
| Polarity | Harness Polarity |
| Cable Outside Diameter (OD) | 2.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N |
| Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥40/45dB (MMC/MTP®) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Consistent APC interfaces across the assembly
All three connection points use APC polish, making this product version distinct from the UPC-branch alternative. The MMC and MTP connectors are female and non-pinned, and every must be paired with the matching pinned mate. confirm that the network equipment design expects two eight-fiber branches from a sixteen-fiber MMC port and that the channel follows harness polarity before site installation.
Multimode optical performance
The completed product has 0.35dB maximum insertion loss. Minimum return loss is 40dB at the MMC interface and 45dB at the MTP APC interfaces, with OM4 attenuation specified at 850nm and 1300nm. These data support engineering of the passive link; they do not override the transceiver manufacturer’s limits for complete connections or fiber distance.
Branch routing and length choices
Stock length choices are 1m (3ft), 2m (7ft) and 3m (10ft), with customized lengths in feet or meters. Keep the breakout point accessible for inspection and avoid burying it under a tight bundle. The two MTP legs ought to comply with similar bend and strain conditions, especially where they terminate in adjacent ports on the same panel.
Ordering and Factory Support
Use part number 16FMMCMTPOM4 and document the APC-to-APC breakout version when requesting a quotation. Supply complete length, quantity and any branch-label scheme; project-specific fan-out data can readily be reviewed against a simple rack or port drawing. For Nigerian orders, our team can check the requirement before coordinating manufacture and international delivery.
