For Nigerian deployments, this product should be evaluated as part of the complete network path, including its connectors, mapping and acceptance values. The APC-to-APC version of the 24FMMCMTPOM4 breakout carries 24 OM4 fibers from one MMC APC female connector to three MTP-8 APC Elite female legs. All connection points use APC polish, and the fan-out body follows factory harness polarity. It provides three eight-fiber multimode paths in one compact, assembled at the factory assembly.
Product Highlights
- MMC Female to MTP® Female, 24 Fibers
- OM4 50/125μm, bend-insensitive fiber
- MMC insertion loss ≤0.35dB, return loss ≥40/45dB (MMC/MTP®)
- Harness Polarity wiring scheme
- 2.5mm Plenum (OFNP) cable
- Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)
Specifications
| Part Number | 24FMMCMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC Female (Non-Pinned) |
| Connector B | US Conec MTP® Elite Female (Non-Pinned) |
| Polish Type | APC to APC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Fiber Count | 24 Fibers |
| Polarity | Harness Polarity |
| Cable Outside Diameter (OD) | 2.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N |
| Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥40/45dB (MMC/MTP®) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
A three-way fan-out with uniform polish
The cable assembly is correct when the two the MMC infrastructure and all three MTP destinations are engineered for APC. The connector interfaces are female and non-pinned, which means pinned mates are needed throughout. validate that the application truly calls for three eight-fiber branches and that no added polarity reversal is introduced by the connected trunk or cassette before deployment.
Loss values for the complete optical path
The completed product is rated at 0.35dB maximum insertion loss, with at least 40dB return loss at MMC and 45dB at MTP APC. Use these connector-specific data when reviewing the passive link. OM4 behaviour at 850/1300nm supports multimode systems, but allowable distance and complete connection count remain properties of the whole transceiver channel.
Installing and identifying three APC branches
Stock length choices are 1m (3ft), 2m (7ft) and 3m (10ft), with customized lengths in feet or meters. Because three similar MTP connectors leave one fan-out, branch labels are specifically valuable. Observe gentle routing around the breakout body, inspect each ferrule and cap any branch that cannot be considered connected immediately.
Ordering and Factory Support
Define 24FMMCMTPOM4 in the APC-to-APC three-leg configuration, with length and quantity. If the three branches terminate in different rack locations, provide the needed leg arrangement and labelling rather than relying on a generic fan-out drawing. For Nigerian orders, our team can check the requirement before coordinating manufacture and international delivery.
