Our MTP®-16 with Offset Key jumper uses OM4 50/125μm fiber and Plenum (OFNP) jacket to deliver a clean, repeatable connection between patch panels, cassettes and active equipment. Customized MTP-16 Jumper, 16/32F, OFNP, Crossover, OM4 in one compact round cable keeps cable management simple even in dense installations.
Available lengths are 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP®-16 with Offset Key to MTP®-16 with Offset Key,
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB, return loss ≥27/45dB (UPC/APC)
- Crossover polarity
- Plenum (OFNP)
- Minimum bend radius 7.5mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | 16FMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP®-16 with Offset Key |
| Connector B | US Conec MTP®-16 with Offset Key |
| Polish Type | UPC/APC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Trunk Outside Diameter (OD) | 3.0mm, 7.2mm |
| Cable Jacket | Plenum (OFNP) |
| Polarity | Crossover |
| Minimum Bend Radius | 7.5mm |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥27/45dB (UPC/APC) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -10 to 70°C (14 to 158°F) |
Applications
Inside the cabinet, this jumper handles the last meters of a parallel optics link. Its compact round jacket keeps airflow clear and makes dressing cables around managers straightforward.
Polarity and Gender Options
Choosing the right polarity is the key to a working MPO link. As a factory we build Type A, Type B and Type C versions of this cable, with male or female connectors on either end. If you are migrating an existing install, send us the current panel layout and we will confirm the correct combination before production.
Ordering Information
Please reference 16FMTPOM4 in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
Built to Your Spec
We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.
Logistics
We dispatch worldwide by international courier, with air and sea freight options for bulk orders. Goods can be sent collect on your courier account, and documentation for customs clearance is provided with every shipment.
