One MTP® Elite Female/Male harness replaces a cassette, two patch cords and the loss that comes with them. OS2 9/125μm fiber and Plenum (OFNP)/LSZH jacket, built and tested end to end in our own facility.
Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP® Elite Female/Male to LC/SC/FC/ST, 24-144 Fibers (Base-24)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB, return loss ≥60dB
- Type A/Type B/Type C polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMTPXXSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female/Male |
| Connector B | LC/SC/FC/ST |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to UPC/APC |
| Polarity | Type A/Type B/Type C |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Trunk Outside Diameter (OD) | 3.0-11.7mm |
| Breakout Outside Diameter (OD) | 2.0mm (Duplex), 2.0/0.9mm (Simplex) |
| Fiber Count | 24-144 Fibers (Base-24) |
| MTP Connector IL | ≤0.35dB |
| MTP Connector RL | ≥60dB |
| Standard Connectors IL | UPC≤0.2dB, APC≤0.3dB |
| Standard Connectors RL | UPC≥50dB, APC≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Typical uses include connecting a parallel optics port to multiple duplex LC ports, wiring between an MPO backbone and LC equipped switches or servers, and neat fan-out at the equipment rack. A 24-fiber MPO interface is the standard for 100GBASE-SR10 CFP, CFP2 and CPAK modules, and is equally at home in structured trunking between panels.
LC Legs and Port Mapping
The duplex LC legs are manufactured to a uniform breakout length and labeled in sequence, so each pair lands on the intended port. Uniboot and standard duplex LC options are available, and leg length can be adjusted for your rack layout.
Ordering Information
Ordering is simple: send us XXMTPXXSMF and your required lengths and quantities, and we return a factory quote the same working day. Small trial orders are welcome before you commit to a full project rollout.
Logistics
We dispatch worldwide by international courier, with air and sea freight options for bulk orders. Goods can be sent collect on your courier account, and documentation for customs clearance is provided with every shipment.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
