A Customized breakout cable for parallel to parallel or parallel to duplex connections. 24 Fibers, , . Each leg is labeled and length matched in the factory for a clean installation.
Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- Insertion loss ≤0.35/0.6dB (Elite/Standard), return loss ≥20dB (MTP-24), ≥27dB (MTP-8/MTP-12)
- 3.0mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | 24FMTPOM4 |
|---|---|
| Manufacturer | HT |
| Fiber Connector | US Conec MTP® |
| Connector Keyway | Up to Down |
| Fibre Mode | OM4 50/125μm |
| Gender | Female/Male |
| Fiber Count | 24 Fibers |
| Cable Outside Diameter (OD) | 3.0mm |
| Flame Rating | LSZH/Plenum (OFNP) |
| Test Wavelength | 850nm |
| Insertion Loss | ≤0.35/0.6dB (Elite/Standard) |
| Return Loss | ≥20dB (MTP-24), ≥27dB (MTP-8/MTP-12) |
Applications
Common applications include splitting an 800G or 400G parallel port into multiple lower rate links, connecting a spine switch to several leaf switches, and fanning a trunk out to transceivers without a cassette. A 24-fiber MPO interface is the standard for 100GBASE-SR10 CFP, CFP2 and CPAK modules, and is equally at home in structured trunking between panels.
Breakout Geometry and Wiring
Because the breakout is made in the factory, every leg has controlled length and identical optical performance. The mapping from trunk fibers to breakout connectors follows the specified polarity, and custom mappings are available for special transceiver combinations.
Ordering Information
Ordering is simple: send us 24FMTPOM4 and your required lengths and quantities, and we return a factory quote the same working day. Small trial orders are welcome before you commit to a full project rollout.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
How We Pack
Every cable is protected with dust caps and individual packaging before being boxed for shipment. Batch test reports and your own part number labels can be included in each bag.
