The 800G OSFP Twin-port OSFP IHS/Finned Top to 2 x 400G QSFP112 Active Copper Breakout DAC Cable provides an 850Gbps (8x 106.25Gbps) copper connection between OSFP (IHS/Finned Top) to 2x QSFP112 ports with a cable length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for InfiniBand NDR fabrics, GPU clusters and AI training networks.
Product Highlights
- OSFP (IHS/Finned Top) to 2x QSFP112
- Data rate: 850Gbps (8x 106.25Gbps)
- Cable type: Active Breakout DAC (ACC)
- Length: 1-5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-2QACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 2x QSFP112 |
| Max. Data Rate | 850Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active Breakout DAC (ACC) |
| Cable Length | 1-5m (3ft-16ft) |
| Wire AWG | 26-30AWG |
| Minimum Bend Radius | 32.5-40mm |
| Max. Power Consumption | 1.5W (OSFP End) 0.6W (QSFP112 Per End) |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 to Dual 4x100G-PAM4 |
| Application | 800G/400G Ethernet/InfiniBand |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev5.0, Q112 MSA |
Applications
In InfiniBand NDR fabrics, GPU clusters and AI training networks, the 800G OSFP Twin-port OSFP IHS/Finned Top to 2 x 400G QSFP112 Active Copper Breakout DAC Cable provides a factory terminated 850Gbps (8x 106.25Gbps) link between OSFP (IHS/Finned Top) to 2x QSFP112 ports. This unit is supplied at 1-5m (3ft-16ft). One port becomes 2x QSFP112, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Standards compliance covers CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev5.0, Q112 MSA. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to 2x QSFP112 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 1-5m (3ft-16ft) under part number OSFP-800G-2QACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG. Samples for testing can be arranged before bulk orders.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
