The NVIDIA InfiniBand Compatible 800G OSFP OFLPC Passive DAC provides an 800Gbps copper connection between OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top) ports with a cable length of 0.5m (2ft). As a passive cable it draws essentially no power and adds no latency to the link. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for InfiniBand NDR fabrics, GPU clusters and AI training networks.
Product Highlights
- OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Passive DAC
- Length: 4 factory standard lengths covering 0.5m (2ft) to 2m (7ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| NVIDIA/Mellanox InfiniBand Compatible | MCP4Y10-N00A-FLT |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive DAC |
| Cable Length | 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft) |
| Jacket Material | PET |
| Minimum Bend Radius | 34.5mm |
| Wire AWG | 30AWG |
| Max. Power Consumption | 0.1W Per End |
| Modulation Format | 8x100G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 800G InfiniBand |
| Protocols | OSFP MSA, IEEE 802.3ck and CMIS 5.0 |
Applications
Designed for InfiniBand NDR fabrics, GPU clusters and AI training networks, the NVIDIA InfiniBand Compatible 800G OSFP OFLPC Passive DAC carries 800Gbps between OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top) interfaces. This unit is produced in 4 standard lengths from 0.5m (2ft) to 2m (7ft). It installs directly into standard ports with no separate transceivers or patch cords to manage at either end. It is interoperable with NVIDIA/Mellanox InfiniBand platforms and replaces the NVIDIA/Mellanox InfiniBand part MCP4Y10-N00A-FLT directly. The link runs 8x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Compliance: OSFP MSA, IEEE 802.3ck and CMIS 5.0. For projects standardized on NVIDIA/Mellanox InfiniBand hardware, this product replaces the MCP4Y10-N00A-FLT directly, with identical fit and function. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
The factory part number is OSFP-800G-OFLPC. This cable is available in 0.5m (2ft), 1m (3ft), 1.5m (5ft) and 2m (7ft). Lengths outside the standard range are made to order in our factory. Wire gauge: 30AWG.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
