The 100G QSFP28 4x 25G NRZ to 2x 50G QSFP28 2x 25G NRZ Breakout AOC, 1m (3ft) connects QSFP28 to 2x QSFP28 ports at 100Gbps over OM3 multimode breakout fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 100G Ethernet, data center interconnect and 5G transport networks. The standard length range runs from 1m (3ft) to 100m (328ft).
Product Highlights
- QSFP28 to 2x QSFP28
- Data rate: 100Gbps
- Cable type: OM3 multimode breakout
- Length: 10 factory standard lengths covering 1m (3ft) to 100m (328ft)
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-100G-2QAOxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 to 2x QSFP28 |
| Max. Data Rate | 100Gbps |
| Cable Length | 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 20m (66ft), 30m (98ft), 50m (164ft), 70m (230ft), 100m (328ft) |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 2.2W (100G Per End)1.5W (50G Per End) |
| Modulation Format | 4x 25G-NRZ to 2x 25G-NRZ |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Jacket Material | OFNP |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | QSFP28 Electrical MSA, SFF-8636, SFF-8665 |
Applications
The 100G QSFP28 4x 25G NRZ to 2x 50G QSFP28 2x 25G NRZ Breakout AOC, 1m (3ft) connects QSFP28 to 2x QSFP28 ports at 100Gbps in 100G Ethernet, data center interconnect and 5G transport networks. This unit is produced in 10 standard lengths from 1m (3ft) to 100m (328ft). The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Standards compliance covers QSFP28 Electrical MSA, SFF-8636, SFF-8665. The unit works in any equipment with a standard QSFP28 to 2x QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
The part number depends on length, e.g. QSFP-100G-2QAO01 at the shortest standard length. This cable is available in 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 20m (66ft), 30m (98ft), 50m (164ft), 70m (230ft) and 100m (328ft). Lengths outside the standard range are made to order in our factory.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Worldwide Delivery
We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
