Built for 100G Ethernet, data center interconnect and 5G transport networks, the 100G QSFP28 4x 25G NRZ AOC, 10m (33ft) delivers 100Gbps between QSFP28 to QSFP28 interfaces over OM3 multimode fiber at 850nm. The integrated design removes the need for separate optical modules and simplifies sparing. The standard length range runs from 0.5m (2ft) to 30m (98ft).
Product Highlights
- QSFP28 to QSFP28
- Data rate: 100Gbps
- Cable type: OM3 multimode
- Length: 11 factory standard lengths covering 0.5m (2ft) to 30m (98ft)
- Wavelength: 850nm
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| H3C Compatible | QSFP-100G-D-AOC-10M |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 to QSFP28 |
| Max Data Rate | 100Gbps |
| Minimum Bend Radius | 30mm |
| Cable Length | 0.5m (2ft), 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) |
| Jacket Material | OFNP |
| Cable Type | Optical Cable |
| Receiver Type | PIN |
| Transmitter Type | VCSEL |
| Wavelength | 850nm |
| Power Consumption | <2.2W |
| MTBF | ≈50 Million Hours |
| Power supply | 3.3V |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | IEEE 802.3 bm, SFF-8665 |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Modulation Format | 4x 25G-NRZ to 4x 25G-NRZ |
| Application | 100G Ethernet |
Applications
The 100G QSFP28 4x 25G NRZ AOC, 10m (33ft) is a 100Gbps active optical cable for QSFP28 to QSFP28 connections in 100G Ethernet, data center interconnect and 5G transport networks. This unit is produced in 11 standard lengths from 0.5m (2ft) to 30m (98ft). The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. Compatibility with H3C systems is verified in our own test lab before shipment, so the unit works out of the box as an equivalent of QSFP-100G-D-AOC-10M.
Standards and Compatibility
Compliance: IEEE 802.3 bm, SFF-8665. For projects standardized on H3C hardware, this product replaces the QSFP-100G-D-AOC-10M directly, with identical fit and function. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
The factory part number is QSFP-100G-AO10-GENERIC. This cable is available in 0.5m (2ft), 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). Lengths outside the standard range are made to order in our factory.
Worldwide Delivery
We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.
Our Testing Process
Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
